Solid Wood Stockroom Shelving
 
It starts with our solid wood system to a complete modular solution.....there's nothing like a Lundia Stockroom
Product Materials:
Uprights: Manufactured from clear solid hemlock or douglas fir. Two 1 - 5/16" x 1 5/8" stiles have a 3/8"wide x 5/8"deep plow the entire height to receive shelf end channels and are to be drilled with 3/16" diameter holes on 1" centers to allow for shelf adjustability. Stiles are locked together with two or more cross members mortised into the stiles. All components are machined smooth with all outside corners eased.
Shelves: All shelf materials are machined to accept aluminum end channels at the ends of each shelf to rest on shelf support pins. Standard shelves are made of solid pine 3/4" edge glued.
Shelf Support Pins: Shelf pins are manufactured of non-rusting alloy. Pins are 3/16" diameter x 1 1/4"long (Shoulder to end).
X-Braces: Consist of two 16 gauge steel straps with holes punched at each end. Straps are galvanized and deburred. Straps are riveted at their centers in order to form an "X" when in use. They are to be attached at the rear of shelving units. We recommend an X-brace at every other section.
  General Dimensions:
Upright Heights: Available in 36", 72", 84", 96", 108", 120" and 144"
Custom heights are also available (Call for details)
Upright Depths: Available in 12", 15", 18" and 24" depths
Shelving Widths: Available in 24", 30", 36", 42", 48" widths
Custom widths are also available (Call for details)
Shelving Thickness: Standard in 3/4" thickness, also available in 7/8"
Shelving Depths: Available in 12", 15", 18" and 24" depths

Options:
*Hardboard backs
*Chickenwire backs
*Kickboards
*Back to back clamps
*Hardboard end panels
*Overhead bracing

Installation:

We can provide factory authorized installation. Call for details.