Use the calculator below to determine what frames you can use against any wall space:
Notes:
1. If the difference between your assembled frames and wall dimension is under 1.75" you may need to order an End Frame Connection Kit. Here is the link: http://www.lundiausa.com/closet_brackets.htm

2. This calculator is for using one Starter Frame and any amount of Add on Frames with open sides. Closed ends are thicker and require more space. Do not use this calculator if you are using any closed ends.

  Frame Width Combinations

Enter Your Wall Dimension

 

 

IMPORTANT NOTES:

If you are selecting any Starter Frame and/or Add on Frame with a CLOSED end, you must account for the additional thickness of our closed end upright. All frames widths are shown at the bottom of this page.

REMINDER: You cannot connect an Add On Frame to a Closed End. Add On Frames can only connect to an Open End. Use a new Starter Frame if you want to connect to a Closed End.

Starter Frame
Add On Frame
 
 
 
Both Open Ends
Open End
 
 
 
A 24"frame would be 25 1/4"
A 24"frame would be 24"
 
 
 

Note: Our closed end frames use a thicker upright. Open uprights are approximately 1 3/8"thick while Closed uprights are just over a half inch thicker at 1 7/8". All sizes are approximate within 1/16" to 1/8"